MEDIUM VOLTAGE SWITCHGEAR SYSTEM NES
Draw-out type switchgear for indoor installation, type-tested, factory-assembled, air-insulated, metal-enclosed with a fourfold compartment.
Compact panel for contactor feeder that is 500mm wide.
Application as a single bus system or as a duplex system.
Optional: motor-operated withdrawable units and earthing switches
The following variations are possible for the conduction of hot gases that result from arc faults:
- deflector plate
- arc absorber
- pressure release duct
Technical Data
| Rated values | up to | |
| rated voltage | 12 | kV |
| rated power-frequency withstand voltage | 28 | kV |
| rated lightning impulse withstand voltage | 75 | kV |
| rated busbar current | 2.500 | A |
| rated short-time withstand current | 40 | kA |
| rated peak withstand current | 100 | kA |
| rated short-circuit duration | 3 | s |
| internal arc fault test 1s ** | 40 | kA |
| Dimensions | |||||
| cubicle width | 1.000 | 800 | 650 | 500 | mm |
| cubicle depth* | 1.300 | 1.300 | 1.300 | 1.300 | mm |
| cubicle height | 2.300 – 2.500incl. control compartment H = 600 up to 800 | mmmm | |||
| rated branch currentup to | 2.500 | 2.000 | 1.100 | 350 | A |
* plus 92mm for front door and back wall
** tested contactor panel 40 kA/0,1s
Further values upon request